Add support for models that use Cubism 2.1 style parameter IDs

[mouse-tracker-for-cubism.git] / config.txt

# All coordinates used here are the ones used by the xdo library.
# For a sense of how these work, run "xdotool getmouselocation".

# Milliseconds to sleep for between each update
sleep_ms 5

# Automatic functionality in Live2D
autoBlink 1
autoBreath 1
randomIdleMotion 1
useLipSync 1

# Lip sync configurations

# Gain to apply to audio volume.
# (Linear gain multiplying audio RMS value)
lipSyncGain 10

# Cut-off volume for lip syncing.
# If the volume is below this value, it will be forced to zero.
# This can be useful if you don't have a good quality microphone
# or are in a slightly noisy environment.
# Note: this cut-off is applied *after* applying the gain.
lipSyncCutOff 0.15

# Audio buffer size. This is the window size over which we calculate
# the "real-time" volume. A higher value will give a smoother
# response, but will mean a higher latency.
# The sampling rate is set to 44100 Hz so 4096 samples should
# still have a low latency.
audioBufSize 4096

# Mouth form
# Set this to 1 for a fully smiling mouth, 0 for a normal mouth,
# and -1 for a frowning mouth, or anything in between.
mouthForm 0

# Screen number. Currently tracking is supported only in one screen.
# If you have multiple screens, select the ID of the one you want to track.
screen 0

# The "origin" position, i.e. the coordinates of the cursor where
# the Live2D model will be looking straight ahead.
# For a 1920x1080 screen, {1600, 870} will be somewhere near the
# bottom right corner.
origin_x 1600
origin_y 870

# The bounding box. These are the limits of the coordinates where the
# Live2D model will be looking 30 degrees to each side.
top 0
bottom 1079
left 0
right 1919